Side Effects Of Electric Shaver – Everting You Need To Know

side effects of electric shaver

An electric shaver is a device used for shaving by moving the blade, which is covered with a foil sheet sideways and can be rotated in all directions.

Electric shavers are convenient, and people who don’t want to shave their face with the razor can use an electric shaver.

Before you go for the electric razor, it is worthwhile to know about the side effects of an electric shaver.

Using an electric razor is a lot easier than using a manual razor, but you can still get ingrown hairs and have skin irritation if you’re not careful.

If you’re prone to these issues, it might be best to use an electric hair trimmer to enjoy an easy beard trimming experience instead of an electric shaver because it will leave your beard longer so that your skin won’t be irritated or get ingrown hairs as quickly. 

Side Effects Of Electric Shaver

Electric razors do not provide as close of a shave as traditional razors. The reason is that traditional razors offer a closer shave because they remove the hair itself.

Electric shaver blades have a hard time reaching the contours of your face and neck, resulting in uneven hair growth and missed spots.

These shavers only cut hair at the surface level, meaning you’ll likely have to make multiple passes over each area to get a smooth finish.


Electric shavers irritate the skin by pulling the hair up above the surface and then cutting it off. Many men experience skin irritation after using an electric shaver for the first time.

This can lead to redness and, ingrown hairs, susceptible skin. This irritation can worsen and respond poorly to typical shaving creams and gels with regular use.

Not effective for long hair

One of the most significant drawbacks of using an electric razor is that it is ineffective at cutting long hair.

This can leave you with uneven spots on your face — especially around your mouth and neck. If you’re someone who has a full beard and wants to keep it that way, you might want to consider using a traditional razor instead.

Health risks

Electric razors contain small metal pieces called “flywheels” that can cause minor cuts on your skin if they get in contact with it.

The best way to prevent this is to make sure your blades are clean and change them regularly, so you don’t have any metal pieces in contact with your skin. 

Spread of bacteria

On top of that, electric shavers are more likely to spread bacteria because their blades don’t stay as sterile as those on a manual razor. That means if you have an open cut or pimple on your face, it can lead to an infection. 

Ingrown hairs

Ingrown hairs are a common problem with electric shavers because they tend to cut below the skin surface level, and the hair left behind does not come out of the follicle but grows back into the skin.

The hair that curls back and grows sideways under the skin can result in an inflamed, red bump that looks like a small pimple. Bacteria in the pores causes inflammation and pain, leading to infection over time. 

The most effective way to prevent ingrown hairs is to exfoliate your skin regularly. Soak in warm water for three to four minutes. Use fine-grit sandpaper or washcloth to exfoliate the affected area gently.

You should also avoid using a dull blade since sharp blades will cut hair easier without dragging on the skin.

If you experience ingrown hairs after shaving, use a warm compress to loosen the hair. Apply a warm compress for 10 minutes, twice a day, then try tweezing it out.

Ingrown hairs can be treated with tweezers by pulling the hair from under the skin. However, this should only be done after disinfecting the site with an antiseptic solution. 

If tweezing doesn’t work, ask your doctor about having it removed professionally or try other treatments such as glycolic acid peels or laser therapy.

Try not to scratch or pick at the area, which can cause an infection. If infected, apply antibiotic ointment and see your doctor if the infection doesn’t clear up in two days.


Electric shavers are an excellent invention for men who want to look clean-shaven but don’t want to deal with the hassle of shaving every day. But, if you’re not careful, you could wind up with razor burn or ingrown hairs.

Why is My Electric Shaver Pulling My Hair

electric shaver pulling hair

Electric Shaver Pulling Hair: let’s Find The Answer

When you use an electric razor, inevitably, you’ll occasionally experience the unpleasant sensation of having your hair pulled.

This problem is most likely caused by improper shaving techniques or using the wrong razor for your face. It may also be caused by a dull blade or clogging in the razor.

Most people have experienced the pain of hair getting caught in their electric shaver or razor.

This can be a minor inconvenience, but it can also be a real problem if you have sensitive skin or irritation that is prone to infection.

Before you throw away your electric razor, learn why this happens and how to prevent it.

Electric Shaver Pulling Hair: Find Out Why

Using an electric razor causes the hair to be lifted and cut. Pulling can occur if too much pressure is applied or the blade isn’t sharp enough, especially around areas with coarse hair such as the chin and neck. 

The motorized blades give a quick tug to your hair before cutting it. If too much pressure is applied or the blades aren’t sharp enough, this can cause pulling.

Causes And  Solution

Using pressure

Electric razors are designed to glide effortlessly along the skin, so they don’t require pressure to get a good shave.

If you’re pushing too hard while shaving, that can cause the hair to be pulled out rather than cut off. Try to use only light strokes and allow the razor’s blades to do the work.

Too much pressure can cause the hair to pull and tear out the follicle. Some shavers have a built-in mechanism that indicates when too much pressure is being applied by triggering a warning light or sound.

If your shaver does not have such a mechanism, start shaving with less pressure, especially if you’ve been applying more pressure than usual in an attempt to get a closer shave. 

Electric razors are a convenient and fast way to shave. However, they can irritate if they begin pulling hair.

Hair Type

The type of hair and skin you have is an essential factor in determining whether an electric razor will pull your hair.

People with thick facial hair usually have more problems with an electric razor than those with thin facial hair since there is more resistance when shaving over coarse facial hair.

A foil shaver can cause minor irritation because it allows for a closer shave. The foil also protects sensitive areas of the face from the blades.

Skin Type

Your skin type is another important factor in choosing an electric razor that won’t pull hair.

Dry skin tends to be more sensitive than oily skin, so people with dry skin should use a moisturizer before shaving or find an electric razor that includes a moisturizing strip on the blades.

In addition, some electric razors can cause ingrown hairs when used on certain skin types. Try another brand if you notice ingrown hairs after shaving with an electric razor.

Not Shaving Often Enough

Electric razors require regular cleaning because stubble and dead skin cells can build up in the cutting mechanism, leading to pulling hair.

It’s best to clean them after every use, but at least every few days if you’re shaving daily. This also helps prevent clogged pores and ingrown hairs.

Incorrect Blade Angle

The blades on electric razors have a specific angle at which you must use them must generally be used 30-45 degrees from horizontal — for maximum efficiency.

They should not be held flat against the face or flipped upside down for trimming sideburns or other facial hair.

Choosing The Right Electric Razor

Some electric razors are designed for wet skin, while others are intended only for dry skin. Choosing the right electric razor for your skin and beard type is the first step in avoiding irritation and shaving bumps.

There are several different electric shavers out there, and only one will be right for you.

The Shaver Design

When you are shaving with a manual razor, you run the blade across your skin, and the hair is sliced off at the skin level. But when you use an electric razor, there is no blade, just a cutter.

Electric razors do not slide off the hair but rather pull it from the follicle. The result is that sometimes the hair becomes tangled in the blade and gets pulled out instead of being cut off.

This can cause ingrown hairs, as well as painful spots on your scalp or face where hair has been pulled out.

Improper Shaving Technique

Shaving against the grain increases your chances of having hair pulled out by an electric razor because more pressure is required to lift the hair for cutting when you shave in this way.

Apply less pressure when shaving against the grain to avoid pulling and irritation.

The Oil Blades Are Damaged

A damaged foil is a common cause of hair pulling in an electric razor. If the holes or slots in the foil are too large, hair will slip through instead of getting cut by the internal blades, leading to painful pulling.

You may also experience this problem if the foil has been punctured. It would help if you replaced damaged foils as soon as possible to prevent further damage to both your skin and the internal blades of your electric razor.

Your Razor Blades Need To Be Replaced

Electric razors are made up of blades that need regular replacement. These blades become dull over time, which may lead to them pulling on your hair instead of cutting it clean.

The Inner Blade Clogged With Debris

Pulling can also occur if your razor’s internal blades are clogged with debris such as hair or skin particles.

You can solve these problems quickly by replacing damaged or worn blades and cleaning out any gunk that may be present in the head of your shaver. 

Your Hair Is Too Long

If you’ve been using manual razors before making the switch to electric, then it may be that your hair is just too long for the device.

Electric razors are usually designed to cut short stubble so that they won’t work as well on longer hair. They may not cut at all.

If you’re making the switch from manual razor to electric, you have to make sure that your hair is at a length where an electric razor can work its magic – about 1-2 days of growth.

Another reason that electric shavers pull hair is that they don’t shave close enough for some people’s preferences.

Some men who shave their heads feel like they need scissors to trim as close as possible after using an electric shaver.

Try switching to an electric razor with rotating blades (like Norelco) if this sounds like you. 

Electric razors are designed to cut hair close to the skin quickly, but some models also pull out hairs. This is caused by using the wrong model for your face and hair type or misusing the razor.

Takeaway: When electric razors pull on hair, it’s usually not permanent. If you can change the settings on your razor or choose a new model that doesn’t cause pulling, you can avoid this painful problem. 

How To Stop Bumps After Shaving – Effective Ways

When you cut your hair, especially with a razor, the tip can curl back around and grow into your skin. This can lead to a painful red bump that looks like a pimple.

They are common for curly hair, but anyone can get them. You’re also more likely to get razor bumps if you have coarse or thick hair.

Razor bumps develop when hair follicles become irritated and infected. This infection causes the skin to swell up around the hair shaft, forming a bump. 

While it’s impossible to prevent razor bumps completely, there are ways to minimize their appearance.

If you want to learn how to stop razor bumps fast, follow the steps below to learn ways to prevent razor bumps:

how to stop bumps after shaving

Guide On How To Stop Razor Bumps After Shaving

Moisturize the area

If you shave the wrong way or use a dull blade, you can end up with razor bumps. As the hair grows back into the skin, it causes inflammation in the follicle and creates a pimple-like bump.

While these razor bumps may not be painful, they’re unsightly. One of the things that you can do is moisturize the area.

After shaving, apply a moisturizer to your skin. Moisturizers containing aloe vera or glycerin can reduce the amount of irritation you experience on your skin.

You may also want to try a product that contains salicylic acid and sulfur.

Smooth a moisturizer over the area before you begin shaving and apply more when you’re done.

Your skin should be thoroughly hydrated before shaving so it’s less likely to become irritated.

Apply a cool compress

Soak a clean washcloth in water and freeze it for a few minutes. Wrap the ice cloth around your face or other affected area for five to 10 minutes, then remove for 20 minutes.

Repeat this process for about 30 minutes. This helps reduce swelling and soothe inflamed skin. This can help relieve any itchiness or discomfort you feel due to razor bumps.

Warm water can be helpful for soothing inflamed skin after shaving, helping to soften the hair follicle and open pores.

A warm compress can also help loosen up ingrown hairs making them easier to extract without damaging the skin. 

You can also make a paste using baking soda and water. Mix two parts baking soda with one-part water and apply it to the razor burn.

This will help dry out the area and remove any excess oil that may be trapped in your pores.

Release ingrown hairs

If you have an ingrown hair, you might need to remove it. To do this, wash the area with soap and water and rub it gently with an exfoliating scrub pad or washcloth to remove the hair.

If you’re dealing with ingrown hairs, try using tweezers to release the hair beneath the skin’s surface. 

If this doesn’t work, you can try using tweezers to pull out the hair gently. Be careful when removing ingrown hairs so you don’t break your skin or spread bacteria that could cause infection. 

Disinfect the tweezers with rubbing alcohol, then carefully pull the hair out of your skin using the tip of the tweezer.

Make sure to remove the hair carefully so that you don’t break off the hair before removing it from your skin.

If you’re having trouble removing the hair or if your skin is irritated, see your doctor or dermatologist for treatment.

Try a home remedy

After shaving, some people benefit from applying mild astringents such as witch hazel (Tucks) to their faces to dry up any oozing lesions and reduce bacteria on their skin.

Apply a mixture of warm water and Epsom salt to the affected area, or try applying a liquid bandage.

You might have many ingredients in your kitchen right now that can help relieve razor bumps and other symptoms you experience after shaving.

Some people have found relief from applying honey or tea tree oil directly to their skin. 

Another thing you can do is apply honey or coconut oil on the affected areas for about 15 minutes before removing with warm water and patting dry with a towel. Repeat several times each day until your symptoms improve.

Use topical treatments

Topical treatments containing salicylic acid, glycolic acid, or benzoyl peroxide can help prevent irritation by exfoliating the skin after shaving, reducing inflammation, and soothing irritated skin that may be prone to razor burn or ingrown hairs.

Ever had unsightly red bumps post-shave? It’s a common problem. The good news is that you can do things to help prevent it.

How To Prevent Razor Bumps After Shaving

Avoid Using Soap When Shaving

Do not use soap when shaving because it can dry out your skin and cause irritation that leads to bumps.

Shaving cream

Using shaving gel or cream instead of soap will moisturize your skin, making shaving easier and less likely for you to get nicks or cuts.

It would be best to use a moisturizing lotion or cream on your skin after shaving to keep it from drying out and getting irritated.

Shave in the direction of hair growth

Never shave against the grain, as this can cause ingrown hairs and your skin to become irritated. Shave with the grain instead.

Rinse your blade often to remove hair clippings so you won’t end up shaving over the same area multiple times. It will also prevent you from applying too much pressure to your skin and causing irritation.

Make sure your razor is sharp

Dull blades often cause razor burn, so make sure your electric shaver is as sharp as possible before shaving. Dull blades tug on your hair instead of cutting it cleanly, which can irritate your skin.

If you don’t know when you last changed your blade, it’s time to do so. Wet your beard thoroughly before you shave.

A warm shower or bath will soften your facial hair and make it easier for the blade to cut through without pulling or tugging.  


In the end, razor bumps result from a combination of factors, and it’s best to treat them in the same way.

Start by moisturizing your skin because it’s more likely to crack and cause redness after shaving if you have dry skin.

Try cooling your skin down as well – perhaps by putting cold water on the affected area or by taking a cool shower.

It may also help to use a pumice stone to remove the thin layer of skin that causes the ingrown hairs.

In addition, be sure to use proper shaving techniques and touch up your shave where necessary – this is an art that takes practice.

And finally, try a home remedy before you reach for the expensive ointments at the drugstore.

How To Make Your Facial Hair Thicker

how to make your facial hair thicker

Look to grow your facial hair thicker? Well, there are a couple of ways to do so. Keep in mind that everyone one’s facial hair grows differently, and your facial pattern will be different from others.

However, with these tips, you should make your facial hair thicker and fuller.

Complete Guide To Making Your Facial Hair Thicker

1. Don’t Shave

Some people believe shaving makes beard hair thicker and improves hair density. It could not be farther from the truth.

In reality, hair follicle density is determined by age, genes, and hormone levels. When you shave, you just cut off the hair strands, which don’t affect the hair follicle.

Avoid shaving your beard to allow it to grow out. Trimming will also reduce the beard thickness, so you might want to skip that for a while.

2. Use a Derma Roller

If you’ve been in the world of hair growth for a while, then you must have heard of derma rollers. This effective tool uses a micro-needling method to promote hair growth, which could help grow a thicker beard.

A derma roller features hundreds of tiny needles that puncture the upper layer of the skin to accelerate collagen production and improve blood flow.

It promotes the health and elasticity of the skin and reactivates hair follicles, thereby increasing blood flow which helps to bring nutrients to the patchy area of the beard.

Using a derma is one of the best ways to cover up those areas with more hairs to make your beard look fuller.

3. Reduce stress

Stress can have many harmful effects, and one of them is reducing beard growth. Constant stress leads to the release of harmful hormones such as cortisol which affects testosterone levels.

Stress hormones can reduce the amount of nutrient-rich blood reaching the hair follicles, reducing beard growth.

Reducing stress offers more benefits than allowing you to grow a fuller beard. It will help you keep your body and mind healthy.

4. Improve Your Diet

Hair is composed of a protein called keratin, making eating a balanced diet very important.

A high-protein meal would promote hair growth by providing your body with the necessary nutrients needed to make hair grow thicker and stronger. Remember to include biotin, vitamin C, and Vitamin E.

5. Drink Plenty of Water

Drinking enough water is necessary to maintain proper kidney function and get rid of harmful compounds. It also keeps your skin hydrated and healthy.

Having healthy skin is great for your hair follicles. The recommended daily water intake is 8 – 10 glasses, so you might want to keep count.

6. Take Supplements

It might sound extreme. However, supplements are nothing more than nutritional aids that helps to boost your diet.

Supplements could come in the form of vitamins and minerals, and while they can be helpful, you might want to contact your doctor before taking any supplements.

To grow and maintain a fuller beard, you will need key vitamins and minerals like biotin, vitamin E, vitamin D, Vitamin C, copper, zinc, and magnesium.

7. Shampoo and Condition Your Beard

To aid in beard growth, you need to maintain the hair you already have. A plus is that healthy-looking beard hairs can make your beard look thick.

To get started, you will need to get a beard shampoo. Shampooing your beard will also prevent itchiness and get rid of dust and microbes.

A beard conditioner is needed to add moisture to the hair and prevent your beard from curling. It also promotes the wellness of the skin.

8. Use Minoxidil

If you’re not getting the results you seek, you might want to try other solutions like Minoxidil. 

This treatment was first introduced in the 1970s to treat hypertension but led to increased hair growth. While the product is used on the scalp, it has positive results on facial hair growth.

Remember that the treatment must be used continuously for the rest of your life if you wish to keep the beard density and thickness. Stopping treatment will see your hair fall off.

It would be best to watch out for the side effects of using the product. Minoxidil side effects include headaches, dryness, itchiness, and irritation.