How To Taper Hair With Clippers In Right Way 6 Easy Steps

Are you looking to change up your entire looking? Maybe you are just looking for something new. Whatever the situation is, men cannot go wrong with the tight fade or tapered cut.

This is a hairstyle that comes along with immense benefits. Right at the forefront is that it is low-maintenance.

It is as low-maintenance as having a bald head. The only difference is that you still have hair! And, this is just one of the many reasons that this is one of the most popular haircuts amongst men.

Achieving a good taper cut isn’t exactly the most natural thing in the world. This is especially true if you aren’t using the right equipment and techniques.

With the right equipment, you can fade, taper, and cut your hair by yourself. How to taper hair with electric hair clippers step by step find out below.

How To Taper Hair With Clippers Guide

how to taper hair with clippers step by step

Familiarize Yourself With Those Guards

The guards will be one of the essential tools in your tool belt. Therefore you need to familiarize yourself with them.

Pick them up, touch them, hold them in your hand, and test them on the clippers. Get used to handling and keeping them because they will become your new best friend.

The most important thing to understand about the guards is their size. For instance, know that when someone says give me a number four-guard, they are talking about a guard that measures a ½ -inch in size.

This means that the number four guard can cut hair a ½ inch. As the guard numbers go down, so do the cutting lengths. Just remember that you are tapering your hair, so this is what you are doing to it.

You are starting at one size and gradually getting lower and lower until you reach the bottom.

So, achieving a cut like this means starting with a more prominent guard and working your way down to the smallest one.

Lay Your Guards Out

Tapering your hair is only half the battle. The other half is preparation. However, it is the preparation that is the half that will make your job easier. Find yourself a functional workspace like the bathroom.

This should also give you quick and easy access to several mirrors, which are other items that you will need. Once you have chosen an adequate workspace, you will be ready to layout your tools.

Place a towel and layout your guards in the other you intend to use them. Make sure they are clean and free of debris before introducing them to your hair.

Practice The Scooping Motion

Not only do you need to be familiar with your guards, but you need to be familiar with your electric hair clippers.

There are clippers out there on the market that will do all the work for you? Most clippers today lift the hair before cutting it.

This is a technique that not only ensures that you get an excellent clean-cut, but it ensures that you get a comfortable one.

Not lifting the hair before cutting it could cause uncomfortable tugging or pulling.

This is the same theory that you want to apply to your cutting motion. The goal is to make a scooping motion with the clippers

Hold the clippers in your hand and practice making this motion. By the time you are done, you want it to be like second nature. You want to be scooping without even knowing that you are doing it.

Start With A Guideline

The first thing that you need is a guideline. This will be the starting point for the taper. Some pros like to start at the top of the ears and work their way down, while others will start a little higher.

It just depends on preference or the individual getting the cut. You will still want to start with some guidelines, whether it be above or below the ears.

This guideline is just a guide. It gives you a good idea of where you can’t and can go. The guideline will work from one side of the head around to the other.

Starting With The Biggest Guard And Working Down

Now that you have your guideline, all the hard work is done. You will start with the biggest guard and work your way down the guideline.

Remember to work in that scooping motion, so you help the clippers lift and cut their hair. It is best to work from the bottom up.

This means that you start your clippers at the bottom (below the guideline) and work your way up. You will continue to do just this until you go all the way around the head.

When you have made it entirely around the head, you will go down the next guard size and do the same thing. You will continue this process until you reach the desired size.

Be Sure To Do Your Research

It all comes down to planning and preparation. Having everything laid right out in front of you and knowing what you want will make the entire job all that much easier.

You also have to remember that people have different ideas about tapers. Tapering might mean one thing to you, but it might mean something else entirely to someone else.

Not only this but there is also a variety of tapering styles. You have everything from the Afro taper to the mohawk taper fade. Make sure you choose a taper that suits your style and personality.


Tapering your hair will come along with a lot of benefits. The biggest is that it is low-maintenance. Not only this, but it provides a classic look that will be in style for years and years to come.

That being said, achieving that perfect taper won’t be easy, especially if you are doing the job yourself.

With a little due diligence and effort, you won’t have a problem getting what you are looking for.

FAQ (Frequently Asked Questions)

What’s the difference between a high taper and a low taper?

A high taper is a type of men’s haircut with both sides trimmed shorter, starting at 2 inches from the top of the hair to the other sides of the head, while a low taper is a haircut where the hair gradually gets shorter from the lower level, above the ears.

How do I stop my clippers from buzzing?

The first thing you need to do is have a drop of oil on the blade every time you use it. Secondly, there is usually a power screw on the right-hand side of every clipper.

All you need to do is to adjust it. Adjust that so that it completely goes across the slots in the stationary one, but not too far or too noisy.

Why are my Oster clippers so loud?

If your Oster clippers are so loud, it happens due to a manufacturing flaw with this specific generation of clippers and usually happens when the blade is in motion.

If the motor of the Oster runs without a blade, it will produce a normal sound. The sound also becomes loud when the plastic part that moves the blade gets loose and needs grease.


What To Do When Your Hair Clippers Is Not Cutting Well

Learning How To Cut Hair With Clippers In-depth Guide

How To fix Wahl Clippers Loud Noise? Proven Ways To Actualize That

What To Do When Your Hair Clippers Is Not Cutting Well

One can really overspend every week or month if they aren’t careful. This is especially true if you have kids or are just one of those individuals that like to shop.

Whatever the situation is, if you are looking to stretch your budget and get more bang for your buck then cutting and tapering your own hair in the comfort of your own home is your very best option.

It might not seem like you save a lot on a haircut, but just look at how many times a month you get your hair cut.

And, a trip to the barber isn’t just the expense of the cut. You have to throw in your gas and the wear and tear on your vehicle. It will all add up.

Clippers are fairly inexpensive and with the right care and maintenance, they can last years and years.

Of course, this is not to say that you won’t experience a problem during the ownership of these clippers.

In fact, clippers need constant care and maintenance. Below, you are going to learn about some of the most common problems as to why your clippers aren’t cutting hair well and what you can do to fix them.

Things To Do When Your Hair Clippers Not Cutting Well

my hair clippers not cutting well

Make A Careful Observation

The first thing that you are going to have to do is listen to the clippers. Noise can tell you a lot about a mechanical device. Heck, if your hair clipper is making loud noise you would probably know it.

Well, you need to adopt this kind of familiarity with your clippers as well. Listen to them when they are in regular operation and get used to the sound.

So, if your clippers aren’t cutting good go ahead and turn them on. What do you hear? Does it sound like the motor is running fully? Maybe the clippers are getting bogged down in coarse and long hairs?

Check The Connection And Battery

If it sounds like the motor on your hair cutting machine isn’t running at full speed then there is a chance that something could be wrong with the batteries.

Maybe the Clippers aren’t getting the full power and juice that they need to power the motor. If you are using cordless clippers it could be because the battery isn’t fully charged.

Check the life of the battery and recharge it if necessary. If you are using a corded pair of clippers, you will want to mess around with the electrical cable.

Right where it enters the clippers. Move the cable around and see if you can notice a difference in the sound of the motor. It just might be that you have a short or a loose connection.

Checking For Obstructions

Just because you are oiling and washing your clippers at the end of every user doesn’t mean that your blades won’t wear.

Yes, they will wear more slowly, but they will eventually reach the point where they will become completely dull. That aside, regular cleaning won’t also prevent build-ups.

If you have noticed there are probably two big screw heads right on the front of your clippers. Removing these two screws will give you access to the blade, spring, and hinges.

After many uses, it is possible for hair, dirt, and other debris to enter this area. If your motor sounds like it is running at full power, but your blades still aren’t cutting it could be that something in this area has them obstructed.

Remove the cover and make sure that this area is free of dirt and debris.

Checking The Springs And Hinges

The springs or hinges are vital components of any set of clippers. Their specific job is to help transfer tension by offering an easier and more pleasurable cutting experience.

However, the only way that it can do this is if the springs are perfectly balanced. If one side gets out of whack, which isn’t all that uncommon, it is going to cause the blade to get stuck.

The best way to check this is by removing the clipper blade spring housing from the clippers. Simply take those two screws off on the head of the razor and you will see this set up.

Once removed, try placing it on a flat table. You want both sides to be perfectly even. If they aren’t it is going to cause hair to lodge on one side.

If you are looking at an uneven configuration then it is entirely possible that the springs have gotten damaged or bent.

You can try to rectify this by bending them back in place. Just be careful, as a spring can only offer so much bend and tension before it is done for good.

The Blade Sockets

The blade sockets are another integral part of your clippers. They can also cause some of the biggest problems if they are left unchecked.

And, one of those biggest problems is improper cutting or no cutting at all. For those unfamiliar with a blade socket, this is just simply the part of the razor that has 2 ears.

These two ears will fit perfectly into the hinge. The most common problem with this component is that one of the ears will become bent.

This is something that usually just happens because of regular use, but once it happens, you are looking at major problems.

If this is what is wrong with your clippers you will probably notice right away because the clippers will rattle. All that being said, making a repair like this can be both tricky and simple if you aren’t careful.

The most important thing to remember is that you want to bring the ears as close together as you possibly can without getting them too close if that makes sense.

If they are too close together, they will not be able to properly house the hinge, and you will just be looking at even more problems.

Dull Blades

Dull blades are an all too common problem when it comes to clippers and razors. Unfortunately, there really isn’t much that you can do about this besides sharpening or replacing them.

You can also make sure that you are oiling the blades after every use to get the most life out of them.

If blade life is a major concern, you can also invest in a pair of clippers that offer self-sharpening technology.

However, it should be noted that these models won’t last forever either, but they will last longer than the traditional ones.


It doesn’t take a genius to see that there really is a lot of clippers. Not only are there a lot of components, but there are a lot of things that can go wrong with these components.

And, it seems like they usually go wrong at the worst possible time. Maintaining and caring for your clippers will not only ensure that you get the most out of your product, but it will ensure that you get a comfortable, clean cut every time.


Can you use clippers to cut pubic hair?

Yes. You are less likely to find a clipper specifically designed for grooming pubic hair, so you might have to go with regular hair clippers.

However, watch out for hair clippers designed for sensitive skin as they will offer more comfort while shaving.

What is the difference between a clipper and a trimmer?

A clipper is a grooming tool intended for bulk hair cutting on larger areas. With clippers, you can completely shave your head in a matter of minutes.

On the other hand, an electric hair trimmer is designed for outlining, edging, dry shaving, and light shaping.

Learning How To Cut Hair With Clippers In depth Guide

Learning how to cut hair with clippers is not just about learning a skill but also about being economical.

Today, getting a haircut could cost you as much as $28. That is just the average cost, as the actual price of a haircut is higher in many salons.

The cost piles up if you have short hair since you would be cutting your hair frequently, but you can save a lot by cutting, fading, and tapering your hair yourself.

We’ll be sincere with you, you might end up with a hair disaster on your first try-out, but that doesn’t mean you should give up.

The best way to get a neat cut even on the first tryout is to follow the instructions to the letter.

Learning How To Cut Your Hair With Clippers: In-depth Guide

learning how to cut hair with clippers

Tools Needed

To start your mini hair salon, you will need several tools. These are essential tools, and they will help you cut your hair as nicely as possible. Fortunately, these tools are relatively cheap.

  • Hair Clippers
  • Hair scissors
  • Handheld mirror
  • Standing or dressing mirror
  • Hair thinning scissors
  • Cutting cape
  • Hairstyling products (you can choose any hairstyling product you think will add luster or your style)

Before you get to the cutting part, you should get familiar with your tools. Depending on the hairstyle you want, you will have to change your clipper guide combs (attachment combs) several.

It’s best to get familiar with them and their functions before shaving rather than having to go back to the manual every time you want to change a comb.

Learning How To Cut Hair With Clippers – A Beginners Guide

Step 1: Set Up Your Workspace

You can choose your room or garage as your workspace. The most important thing is that the place should be clean and have enough lighting.

Since you’re dealing with hair, you will have to clean up afterward, so keep your vacuum cleaner nearby.

Set up a table (where you’ll keep your tools), a chair (where you’ll sit down while cutting your hair), and your standing mirror.

You can place the table beside the chair and the standing right in front of it. This way, you can easily reach for your tools without moving too far from your mirror.

Step 2: Select the Haircut

If this is your first time, you should go with something simple and easy. Sometimes the best hairstyle to try out as a first-timer could be to trim your hair to get rid of split ends. If you’re willing to take the risk of going further, you can go ahead and cut off more hair.

There is another rule to picking out a hairstyle. To pick the perfect hairstyle that would bring out your attractive facial feature, you should choose a hairstyle based on your face shape.

Step 3: Preparing Your Hair

Before shaving, you will have to wash up. Wash your hair with shampoo and conditioner to get off any dirt on it.

The problem with dirty hair is that it clogs up your tools and makes shaving a nightmare. Also, washing your hair right before shaving makes it moist and more comfortable to cut.

With wet hair, the likelihood of bumps and razor bumps occurring is reduced. However, if you have long hair, you might not have to get wet first.

This is because dry hair allows you to see the effects of the cut right away. This way, you can easily adjust to any mistakes.

But we recommend you cut it while it’s wet as dry cuts are more likely to produce uneven hair.

If you do this, you will make only a few minor errors even on your first try-out, and when the hair is dry, you can quickly fix them.

Step 4: Start Cutting The Sides

Choose your attachment comb and fix them onto your clippers (if you’re for a skin fade haircut, you should pick the smallest attachment comb).

Cut your hair against the direction of your hair growth, start from the bottom and cut slowly (to minimize errors), then move the clippers upwards. You will have to do this repeatedly to make sure you get all the hairs.

The portion of your head closer to the ears and neck should be the shortest (for skin fade haircuts). As you move upwards, lessen your grip on the clipper so that more hair remains in this area.

You will notice a difference between the two portions as you shave. Leave the hair at the top of your head.

Also, don’t shave the top of the sides of your head. You will need to fade this area into the lower portions later on.

Step 5: Cutting the Back

To cut the back of your head, you will have to make use of a handheld mirror. When cutting the back, you should slow down and work steadily.

Repeat the same process as you did when cutting the sides and check to make sure it is even and connects well with the sides.

Step 6: Blending

To blend the upper portion (which has more hair) to the lower part, you might need to change the attachment comb to a larger one.

This way, you can blend it in without worrying about cutting too much hair off the two areas.

To blend, use an upward rocking motion, i.e. from the bottom to the top and back again. Remember to leave the top of your hair.

Fading is just the same as blending the two portions. You need to do it carefully so as not to cut off too much of the upper part.

The upper portion must be fuller than the lower portion for it to be considered as a fade.

Step 7: Cutting the Top

Comb out the top of your hair before cutting. Depending on the length of the top and how you want it to look, you might need a pair of scissors to cut out the split ends.

You can also run your clipper on the top to give it a better trim (use a small attachment comb this time)

Step 8: Edging Up Your Hairline

This step can be tricky, but shouldn’t cause any problems if you try hard enough. To clean up your hairline, you’ll need your standing mirror, so that you can have a full view of your hair.

Carefully, cut around the hairline and try to maintain and straight line. You can do the same with your sides and the hair at the back. To cut the hair at the back, you will have to take out your handheld mirror.

Step 9: Wash Up

When done, clear your hair and head with a brush, then take a comb and run it through your hair. Look out for any errors, probably in your hairline. Also, take a look at the back for any missed spots.

If you notice any unevenness on the top of your head, you can use your scissors to make corrections.

After that, you can wash and dry your hair. Take another look and even out any mistakes before applying any hair product to it.

Extra Tips

If you have long hair and you want to go short, then you’ll have to use your scissors to cut it short first, before styling it with your clipper.

Final Thoughts

If you are learning how to cut hair with a hair clipper, follow the steps above carefully, cutting your hair will be nothing but fun.

These instructions will help to minimize errors and help you get the neatest cut even if you’re doing it for the first time.


Can clippers be used as a trimmer?

Unlike trimmers, clippers are designed to cut long hair. If you want to work on short hair or shape your edges, then you might want to stick to an electric hair trimmer.

However, some clippers are designed to function like trimmers with the right attachments.

Can pubs hair trimmer be used for head hair?

Yes, but this is not recommended. You should have a special trimmer dedicated to your pubes alone. This reduces the chances of transmitting bacteria to your pubes.

The pub’s hair trimmer could be just another trimmer designed for facial hair, however, you should out for those made for people with sensitive skin.

How To fix Wahl Clippers Loud Noise? Proven Ways To Actualize That

Wahl is without a doubt one of the best brands that you can own in haircutting tools. Over the years, they have proven time and time again that they are right at the forefront of ingenuity.

Not only this, but each one of their products comes backed with some kind of warranty. Whether it is by 6 months or a year, you will be covered for some time after the initial purchase.

Wahl hair cutting tools are durable and resilient, but they are not impervious to problems. They are just mechanical machines. One of those common problems is noise.

Learn How To fix Wahl Clippers Loud Noise

how to fix wahl clippers loud noise

Understanding Wear And Tear On Blades And Springs

The blades and springs are both integral parts of any set of clippers. The blades cut the hairs, while the springs at the part reduce all the tension. You can imagine the incredible weight that these two components are under at all times.

The blades are constantly coming into contact with hair, dirt, and other debris, while the springs are absorbing the brunt of the tension from the motor and other vibrations. Therefore these two components wear out.

Unfortunately, there isn’t much that you can do to prevent them from wearing because they are mechanical, but a good maintenance routine can help increase the life span.

All that being said, it is not uncommon for the blade or springs to become bent on a Wahl clipper. When this happens, it will cause the clippers to make loud noises and also affect the cutting performance of the hair clipper. Luckily, this is something that can be corrected fairly easily.

Accessing The Springs

You will want to start by removing the head of your clippers. This is the blade assembly, and it should be attached with two screws.

Remove the two screws and you will have access to the entire clipper set up. Once you remove blades, you will notice a setup with springs.

These are the spring that this article is referring to. It is not common for these springs to get bent or misaligned. You will be able to look at them and see if they are bent or out of alignment.

If one or both of them are, you can try to tweak them back in place, reassembling the clippers, and trying them out.

Inspecting The Blades

If nothing is wrong with the springs, then the blades may be the source of the noise. Heck, it could be possible that the source of the noise is both the blades and springs, so we will check both components before just throwing the clippers back together.

Unfortunately, there won’t be too much that you can do if the blades are bent besides replacing them. There are some situations where you might do a little grinding and eliminate the noise, but it is highly unlikely.

Crooked Or Misaligned Blade

Loud noises could also just be a crooked or misaligned blade, which will be easier to deal with than a bent blade. To fix this problem, you need to start by loosening both blade screws, just enough to shift the blades.

Now that you can shift both blades, you want to make sure they are aligned properly. The points of the bottom blade should be about a dime’s width away from the points of the top blade. When you get the blade to this point tighten down on the screws.


Wahl clippers are dependable, but there are still plenty that could go wrong with them. However, with a little care and maintenance, there is a lot that you can prevent. And, what can’t be prevented can be fixed.

FAQ (Frequently Asked Questions)

Is it better to shave with an electric razor or clippers?

Both are good but good in different specific areas. If you want to shave your hair, make use of hair clippers, but if you need to shape and style your beard and mustache, then make use an electric razor.